It is the new solution that allows the processing of motorcars or bulky scrap metals by using a medium-sized mill and thus greatly saving on the cost of the plant.
OPERATION: The system is equipped with a Special Feeder of 2.5 meters wide, that integrates, besides the toothed drum, also a side press. This allows insertion of bulky scrap and Motorcars. The press compresses sideways the motorcars within the crushing chamber, reducing with decision their width; later they are also reduced in the vertical axis by means of a motorised toothed drum and therefore brought to a size suitable to be processed in the mill chamber. The powerful mill rotating inside the chamber chops the material in a considerable and uniform manner. The material is pushed into a manganese steel grid, generating PROLER with excellent, more homogeneous quality and small size. If it is desired to generate larger and faster processed material, simply set the machine according to the other available modes.
The waste material in processing takes two different paths:
1- The thin waste parts such as powders, light plastics and rubbers are promptly removed by a powerful vacuum system in the chamber of the rotary mill.
2- The larger-sized parts are separated subsequently.
MAINTENANCE: The mill has a number of innovative technical features that make maintenance fast and effective. The downtime is limited to the advantage of production. Some examples:
1- In the mill there is an "evacuation door" from which is discharged the material that for some reason cannot be processed. Therefore, fast intervention, without dismantling important parts of the machine.
2- In the event that the mill chamber must be opened for replacements or maintenance, there is a hydraulic piston system which lifts the upper part of the chamber with or without the rotor.
TECHNOLOGY AND MANUFACTURING MATERIALS: The product is made according to the most modern technologies and with the best materials, the result of a long experience in the field of engineering and technology in the scrap metal processing field.
Footprint | |
---|---|
Hammer mill Length | 4.280 [mm] |
Hammer mill Width | 2.900 [mm] |
Hammer mill Height | 4.930 [mm] |
Infeed width | 1.700 [mm] |
Feeder Width | 2.500 [mm] |
Feeder height | 5.700 [mm] |
Technical data | |
Motor power | 600 ÷ 1.100 [kW] |
Output | 15 ÷ 25 [ton/h] |
Hammer mill + special feeder weight | 100.000 [kg] |
Requested fields *
In accordance with Article 13 of European Regulation 679/2016 (GDPR), FRANZOI METALMECCANICA SRL informs you that any personal data provided by you to us, be in paper, magnetic media, electronic or telematic format, will be acquired and processed in full compliance with the European Union General Data Protection Regulation (GDPR). The data provided will be used exclusively to give feedback to the requests received. The provision of the data themselves is therefore optional. Should you refuse to provide this data and / or allow processing of same, it will be impossible for us to insert your details into our database and, consequently, we will be unable to establish a relationship with you or your business. The responsibility for the treatment of your personal data is assumed by: FRANZOI METALMECCANICA SRL Via G. Rossa, 18/A Z.I. 30037 SCORZÈ (Venice) ITALY. SEE PRIVACY POLICY